(1) Aluminum foil surface is clean, sanitary, no bacteria or micro-organisms can not grow on its surface.
(2) aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.
(3) aluminum foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.
(4) aluminum foil itself is not volatile, it itself and packaged food will never dry or shrink.
(5) at high temperature or low temperature, aluminum foil will not have the phenomenon of oil permeability.
(6) aluminum foil is a kind of opaque packaging material, so it is a kind of good packing material for the products of sunlight irradiation.
(7) aluminum foil has good plasticity, so it can be used to pack all kinds of products. Can also cause any shape containers.

H-beam is a more optimized cross-sectional area distribution, more reasonable than the economic section of high-efficiency profiles, because of its section and the English letter "H" the same name. Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structure in all directions, and has been widely used.

Product Name : Carbon Steel Pipe
Material: A53 Gr.B,A36,ST52,ST35,ST42,ST45,X42,X46,X52,X60,X65X70
Standard： API 5L,ASTM A106 Gr.B,ASTM A53 Gr.B,ASTM A179/A192,ASTM A513,ASTM A671,ASTM A672,BS EN 10217,BS EN10296,BS EN 39,BS6323,DIN, EN10217
Certificates ：API 5L,ISO9001,SGS,BV,CCIC
Outer Diameter ：15mm-1200mm
Length :1m,4m,6m,8m,12m according to buyer's request
Surface Treatment :black paint,varnish,oil,galvanized,anti-corrosion coated
Marking: Standard marking,or according to your request.Marking Method:Spray white paint
End Treatment: Plain End/Bevelled End/Grooved End/Threaded End With Plastic Caps

​Standard ：ASTM EN DIN GB ISO JIS BA ANSI
Steel Grade： Q195, Q215,Q235,Q345,ST37, A36,45# ,16Mn, SPHC,SGCC,CGCC
Thickness：0.2-100mm or Customized
Width ：1250-2500mm,or as Your Request ( regular width 1000mm, 1250mm, 1500mm )
Coil ID ：508mm or 610mm
Coil Weight ：3 - 8 ton or as Your Request
Technique： Hot rolled cold rolled as Your Request
Surface ：Treatment Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request
Package ：Standard Export packing(Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet)

​Stainless steel is a steel alloy with increased corrosion resistance compared to carbon/alloy steel.
Common alloying ingredients include chromium (usually at least 11%), nickel, or molybdenum. Alloy content often is on the order of 15-30%.
Common applications for stainless steel include food handling/processing, medical instruments, hardware, appliances, and structural/architectural uses.

Color coated is in the continuous unit to cold rolled strip steel, galvanized strip steel (electric galvanized and hot galvanized) as the base plate, after surface pretreatment (degreasing and chemical treatment), with the method of roller coating, coated with a layer or multiple layers of liquid coating, after baking and cooling plate. The coated steel plate has light weight, beautiful appearance and good anti-corrosion performance, and can be directly processed, it provides a new raw material for the construction industry, shipbuilding industry, vehicle manufacturing industry, furniture industry, electrical industry and so on. It has played a good effect of replacing wood with steel, efficient construction, energy saving and pollution prevention.

Galvanized coil, the thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface.
It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also made by hot dip method, but after leaving the tank, it is immediately heated to about 500℃ to form an alloy film of zinc and iron. This galvanized coil has good coating adhesion and weldability.

Steel Grade：Q195,Q235,Q345,45#, S20C, SAE1010,SAE1020.SAE1045,EN8,EN 19fC45,CK45,SS400 etc
Standard：ASTM A615Gr40/60,BSS4449 Gr460B,500B etc.
Diameter: 6mm-1200mm.
Length: 3000mm-12000mm or as client's request
Tolerance: +0.5mm/-0(dia),+5mm/-0(L)
Heat treatment: Normalized / Annealed / Quenched / tempered
Surface: black,mill,polished,brush,etc
Test: Ultrasonic test according to SEP 1921-84 G3 C/c
Application: Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20' 40' container), parts of larger cross-sections, crankshafts, gears.

Carbon steel, on the other hand, has far lower chromium levels, and is instead a carbon-iron alloy with only a few other materials, if any, as part of its makeup. As a result, it can be referred to as ‘low-alloy’ steel. Both stainless steel and carbon steel feature this basic composition, but carbon steel can be defined by its carbon content. This is normally around 2-2.5%, however this often varies. Though susceptible to rust unlike stainless steel, carbon steel is often cheaper and has its own varying mechanical properties based on carbon content.

Stainless steel strip is an extension of ultra-thin stainless steel plate, and is also a kind of steel plate used in industry. However, unlike ordinary steel plates, stainless steel strip has a longer shape, and its scope of use is also different from ordinary steel plates. At present, there are many varieties of stainless steel strips, and there are also many different production specifications. Different stainless steel strips use different categories. Cold rolled strip is a specially treated stainless steel strip product. It is another industrial steel strip product, which is made of stainless steel strip as the basic material and is processed by cold rolling mill at room temperature. The rolled strip has excellent characteristics such as smooth surface, flatness, high dimensional accuracy and good mechanical functions, and is often processed into rolls and coated steel plates. Cold rolled strip is widely used in tractor, car and other industrial manufacturing. Hot rolled strip is another kind of stainless steel strip, which has low hardness, easy processing, good ductility and other excellent characteristics, so it is often used as a thin plate.

Stainless steel is a steel alloy with increased corrosion resistance compared to carbon/alloy steel.
Common alloying ingredients include chromium (usually at least 11%), nickel, or molybdenum. Alloy content often is on the order of 15-30%.
Common applications for stainless steel include food handling/processing, medical instruments, hardware, appliances, and structural/architectural uses.

Through electrolytic galvanizing, a uniform and dense zinc layer is finally formed on the surface of the steel, but the mechanical properties of the material are still maintained. Electrogalvanized steel is usually sold in coil or sheet form. EG coil is a kind of material that can be cut, slitted and profiled for other purposes. The steel grade of galvanized steel consists of base metal grade, galvanized (E), galvanized layer type and weight. The electro-galvanized products based on SPCC, SPCD, SPCE, SPCF and SPCG are named SECC, SECD, SECE, SECF and SECG respectively.

Characteristics：Weather proof; heating insulation; fireproof; anti-rust; sound insulation; long life span: more than 20 years. Corrosion Resistance: the aluzinc coating surface protects the base steel not only by providing barrier to corrosion elements, but also by the sacrificial nature of the coating.

Place of Origin: China
Standard: JIS ASTM DIN EN ISO
Certificate: Mill Cert ISO ROSH SGS TUV
Size: Welcome to Customize
Surface: Mirror,Anodized,Brushed,Mill Finished,Polished etc
Hardness: Soft,1/2H,H,EH,SH,SEH
Trade Term: EXW FOB CFR CIF DDU DDP etc.
Payment Term: T/T L/C West Union Trade Assurance etc

Place of Origin: China
Standard: JIS ASTM DIN EN ISO
Certificate: Mill Cert ISO ROSH SGS TUV
Size: Welcome to Customize
Surface: Mirror,Anodized,Brushed,Mill Finished,Polished etc
Hardness: Soft,1/2H,H,EH,SH,SEH
Trade Term: EXW FOB CFR CIF DDU DDP etc.
Payment Term: T/T L/C West Union Trade Assurance etc