Steel sheet piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.

Stainless steel I-beams are made of 201(1Cr17Ni5Mn6N), 202(2 Cr13Mn9Ni4), 301(1 Cr17Ni7), 303(Y1Cr18Ni9), 304(OCr18Ni9), 304L (03 Cr19Ni10), 316(0 Cr17Ni12Mo2), 316L(00 Cr17Ni14Mo2), 321 (1 Cr18Ni9Ti), 420( 2cr13), 310S(0 Cr25Ni20), etc. The chemical composition of stainless steel I-beams belongs to general structural rolled steel series, the main test indexes were C, Mn, P and S. According to different grades, the content varies, the approximate range is C<0.08%, Mn: 2.0, P<0.035%, S<0.03%. Materials are widely used in hardware products, medical

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide

Hot-rolled steel coil products have excellent properties such as high strength, good toughness, easy processing and good weldability, and are widely used in manufacturing industries such as steel, construction, machinery, boilers, and pressure vessels.

Steel sheet piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.

Stainless steel angle steel can be composed of different force components according to the different needs of the structure, and can also be used as a connector between components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves. Stainless steel angle steel is a carbon structural steel for construction. It is a simple section steel, mainly used for metal components and plant

The stainless steel channel is a long strip steel whose cross-sectional shape is a groove shape. Same as I-beam, stainless steel channel steel is also divided into two kinds of ordinary channel steel and light channel steel. The main purpose of hot-rolled stainless steel ordinary channel steel is: ordinary channel steel is mainly used for building structure, vehicle manufacturing and other industrial structures, and is often used in conjunction with I-beam. Hot-rolled stainless steel light channel steel (YB164-63) Hot-rolled light channel steel is a kind of steel with wide legs and thin

Flat steel,refers to 12-300mm wide,3-60mm thick,rectangular section and slightly with a blunt edge of steel.Flat steel can be finished steel,can also be used as a blank for welding pipe and thin slab for rolling sheet.Main uses:flat steel as a finished material can be used for hoop iron,tools and mechanical parts,as building frame structure,escalator.

Stainless steel I-beams are made of 201(1Cr17Ni5Mn6N), 202(2 Cr13Mn9Ni4), 301(1 Cr17Ni7), 303(Y1Cr18Ni9), 304(OCr18Ni9), 304L (03 Cr19Ni10), 316(0 Cr17Ni12Mo2), 316L(00 Cr17Ni14Mo2), 321 (1 Cr18Ni9Ti), 420( 2cr13), 310S(0 Cr25Ni20), etc. The chemical composition of stainless steel I-beams belongs to general structural rolled steel series, the main test indexes were C, Mn, P and S. According to different grades, the content varies, the approximate range is C<0.08%, Mn: 2.0, P<0.035%, S<0.03%. Materials are widely used in hardware products, medical

Angle steel, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other. Angle steel can be composed of different force components according to the different needs of the structure, and can also be used as a connector between components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, and warehouse shelves.

Channel steel is a long strip of steel with a groove-shaped section, which is a carbon structural steel for construction and machinery. It is a section steel with a complex section, and its section shape is groove-shaped. Channel steel is mainly used for building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide

H-beam is a new type of steel for economic construction. H-beam has economical and reasonable cross-sectional shape, good mechanical properties, uniform extension of each point on the cross-section and small internal stress during rolling. Compared with ordinary I-beam, H-beam has the advantages of large cross-sectional modulus, light weight and metal saving, which can reduce the building structure by 30-40%. In addition, because its legs are parallel to the inner and outer sides and the leg ends are right angles, the welding and riveting work can be saved by 25%. It is often

Item: Aluminum bar/aluminum bar 1000-8000 alloy/1060 aluminum bar/3003 aluminum bar/5052 aluminum bar
Material: 1050/ 1060/ 2014/ 3003/ 3005/ 3024/ 5052/ 5055/ 5065/ 6003/ 6065/ 6085/ 7012/ 7014/ 8011 etc.
Thickness: 0.2mm-300mm or as required
Length: 1m-12m or as required
Surface Treatment: O-H112
Color: Aluminum color
MOQ: 10tons.We also can accept sample order.
Capacity: 200,000 tons/year
Shipment time: Within 10-20 workdays after receiving deposit
Standard: ASTM,DIN,JIS,BS,GB/T
Certificate: ISO,CE, SGS,BV,BIS
Trade Term: FOB,CIF,CFR,EXW,etc.
Price Term: T/T,L/C,Western Union,Paypal,Apple Pay,Google Pay,D/A,D/P,MoneyGram